The steps and points for attention in the production of LED planar luminous characters

The base of the plane luminous characters is made of iron sheet, and the iron sheet is painted and coated with luminous characters. The LED module is used as the light source, and the carved and cut acrylic shape is used as the panel. The bottom plate and the surrounding edges are made of iron plates that have been welded, polished and painted. (suitable for big characters, firm, cost-effective). Planar luminous character refers to the literal is flat, now generally made of LED materials. For example, resin luminous characters, acrylic luminous characters and fine metal luminous characters all belong to planar luminous characters. It is particularly important to make planar luminous characters. Let's introduce the methods and steps of making planar luminous characters.

Methods / steps for making planar luminous characters:

1. The plane light-emitting words are not three-dimensional advertising words, which can not be done by installing three-dimensional words.

2. The design effect should be based on the font required by the customer. It's better not to use the previous template. This will get twice the result with half the effort. 

3. When making instruments, cut materials according to the strokes of different words to avoid wasting materials.

4. The designed effect drawing must meet the customer satisfaction, and then carry out the final production, so as to avoid returning to modify and wasting time.

5. Compared with the light box, the production requirements of planar luminous characters are not so high, and it does not need to follow the process of the light box, which wastes the time in the process.

6. When conducting a conductivity test, there should be no conductive objects nearby. Words should not be placed in the same place as the bare power supply. A barrier should be used in the middle.

7. Adjust the light source according to the color. Generally, the color of the font is monochrome, which is good-looking. There should be no color confusion. 

8. When calculating the price with customers, you can't calculate the number of installed fonts, but you need to calculate the complexity and production process of installed fonts.

 9. After the luminous word test is completed, make sure to check the circuit and light source again to avoid being unstable.

10. Do not expose the surface that is easy to scratch when packing.

Precautions for the production and installation of plane luminous characters:

1. When installing light box products, it is generally necessary to go up to high altitude, and safety measures should be taken when installing.

2. If you are above the seventh floor, you must use a ladder and a safety belt.

3. If you are on the third to seventh floors, you can use the window as a support point, and two people can pull the safety rope inside.

4. The person in charge of outside installation must wear safety helmet and gloves, and do not drink before installation.

5. The personnel in charge of safety inside should not be distracted and noisy during the construction, and should not relax at all.

6. In the process of construction, all electrified equipment shall be shut down to avoid electric shock to the installation personnel.

7. During installation, do not climb with one hand or step on the unstable position. After the installation, the construction personnel should enter the safe place, and then power on the test.